CUCET Syllabus 2022 PDF Download Here UG and PG Exam Pattern

Table of Contents

CUET Syllabus

National Testing Agency is going to conduct the Central Universities Entrance Test CUET 2022 for undergraduate and postgraduate courses. The candidates who will be qualifying for Central Universities Common Entrance Test(CUET) 2022 are eligible to get admission to 14 Central Universities and 4 State Universities. Students preparing for Central Universities Common Entrance Test(CUET) 2022 must know the syllabus and exam pattern of the examination.

CUET 2022 Syllabus

To ease of candidates we have provided the Central Universities Common Entrance Test (CUET) 2022 syllabus and exam pattern on this page. The students must go through the entire article and check the syllabus and exam pattern for Central Universities Common Entrance Test(CUET) 2022 given in this article because through the syllabus and exam pattern students will get an idea about what topics will be asked in the examination and how much time will be allotted to complete the examination. Bookmark this page to get all the important updates of Central Universities Common Entrance Test(CUET) 2022.

Check out: CUET 2022 Latest Updates

CUET Syllabus 2022: Overview

CUET Syllabus 2022- Overview
Conducting Body National Testing Agency (NTA)
Full-Form Central University Entrance Test (CUET)
Exam Name CUET 2022
Category Syllabus
Duration 2 hours (120 Minutes)
Number of Questions 100 MCQs
Number of Sections 2 Sections
Exam Language English
Marking Scheme 1 mark for the correct answer
Negative Marking 0.25 mark for incorrect answer

Check: ICSE Semester 1 12th Result 2022

Check: ICSE Semester 1 10th Result 2022

CUET Exam Pattern 2022: UG Paper 1

Exam pattern and syllabus are the prerequisites to start preparation for any examination. The students preparing for Central Universities Common Entrance Test(CUET) 2022 must go through the exam pattern given below. There will be 100 questions asked in the Central Universities Common Entrance Test. The students will be given 2 hours to complete the examination. Check out the other details given below in the table:

CUET Details CUET 2022 Exam Pattern
Types of questions MCQs(Multiple Choice Questions)
Total number of questions 100 Questions
Duration 2 hours
Maximum Marks 100 Marks
Marking Scheme Correct Answer = +1 Marks will be allotted for each correct answer.Incorrect Answer = -0.25 Marks will be deducted for each wrong answer.
Topics Part A

  1. Reasoning
  2. General knowledge
  3. General aptitude
  4. English
  5. Numerical aptitude/data interpretation
Part B: Physics and ChemistryPart 3 and 4: Part 3 and 4 are for Mathematics and Biology respectively. The students are required to attempt only one part between parts 3 and 4.

CUET Exam Pattern 2022: UG Paper 2

The exam pattern is different for different courses. Below we have given the exam patent of CUET 2022 examination. The students must go throught the exam pattern given below:

 

Details Exam Pattern
Types of questions MCQs(Multiple Choice Questions)
Total number of questions 100 Questions
Duration 2 hours
Maximum Marks 100 Marks
Marking Scheme Correct Answer = +1 Marks will be allotted for each correct answer.Incorrect Answer = -0.25 Marks will be deducted for each wrong answer.
Topics
  1. English
  2. Analytical skills
  3. Numerical aptitude/data interpretation
  4. General aptitude
  5. General knowledge
  6. Reasoning

CUET Exam Pattern 2022 for PG

Paper Codes Question Pattern
PG-QP-01 to 37, 39 and 41 to 58 PART-A: 25 Questions (English, General Knowledge and Numerical Ability)PART-B: 75 Questions (Respective Subject)
PG-QP-38 100 Questions (English, Verbal Ability, Maths. Quantitative Ability, Data Interpretation and Logical Reasoning)
PG-QP-38 100 Questions (English/Verbal Ability, Maths/Quantitative Ability, Data Interpretation and Logical Reasoning)
PG-QP-40 100 Questions (English, General Knowledge, Computer Basics, General Aptitude, and Logical Reasoning)

CUCET Syllabus 2022 PDF

CUCET Syllabus 2022 For UG Courses

The CUET syllabus plays a vital role in preparation for Central Universities Common Entrance Test(CUET) 2022. Central Universities Common Entrance Test(CUET) is conducted to get admission in 14 central universities and 4 state universities. The students can choose the courses of their choice. For the ease of students, we have come up with the Central Universities Common Entrance Test(CUET) syllabus for UG courses. Check out the syllabus given in the table below:

 

Part Section Subject
Part A
  1. English
  2. Numerical Aptitude/Data Interpretation
  3. Analytical Skills
  4. Reasoning
  5. General Aptitude
  6. General Knowledge
Part B Section I (Physics) Measurement, Motion in one dimension, Laws of Motion, Motion in two dimensions, Work, Power and Energy, Linear Momentum & collisions, Rotation of a rigid body about a fixed axis, Gravitation, Oscillatory motion, Mechanics of solids and fluids, heat and thermodynamics, Wave, Electrostatics, Current Electricity, Magnetic Effect of Current, Electromagnetic induction, Ray Optics and optical instruments, Wave Optics, Modern Physics
Section II (Chemistry) Atomic Structure, Chemical Bonding, Redox Reactions, Equilibrium and Kinetics, Acid-Base Concepts, Acid-Base Concepts, Catalysis, Electrochemistry, Colloids, Colligative Properties of Solution, Periodic Table, Thermochemistry, General Organic Chemistry, Reaction intermediates, Isomerism, Polymers, Carbohydrates, Solid State, Petroleum
Section III (Mathematics) Algebra, Probability, Trigonometry, Coordinate Geometry, Calculus, Vectors, Dynamics, Statics
Section IV (Biology)
  1. Zoology: Origin of Life, Organic Evolution, Mechanism of Organic Evolution, Human Genetics and Eugenics, Applied Biology, Mammalian Anatomy, Animal Physiology
  2. Botany: Plant Cell, Protoplasm, Ecology, Ecosystem, Genetics, Seeds in angiosperm plants, Fruits, Cell differentiation Plant Tissue, Anatomy of Root, stem and leaf, Important phyla, Soil, Photosynthesis.

CUET Syllabus 2022 for BA, BCOM, BBA-  Accountancy

Accountancy: Here we have given the unit-wise syllabus of Accountancy. The syllabus is the roadmap to qualify for any exam the students must know their syllabus before starting preparation for any exam because the syllabus provides calrity about the examination. Check out the unit-wise syllabus of accountancy given below and prepare accordingly.

Accounting for Partnership Firms and Companies

Unit 1: Accounting for Partnership Firms

  1. Partnership: features, Partnership Deed.
  2. Provisions of the Indian Partnership Act 1932 in the absence of partnership deed.
  3. Fixed v/s fluctuating capital accounts. Preparation of Profit and Loss Appropriation account- a division of profit among partners, a guarantee of profits.
  4. Past adjustments (relating to interest on capital, interest on drawing, salary and profit-sharing ratio).
  5. Goodwill: nature, factors affecting and methods of valuation – average profit, super profit and capitalization.

Accounting for Partnership firms – Reconstitution and Dissolution.

  1. Change in the Profit Sharing Ratio among the existing partners – sacrificing ratio, gaining ratio, accounting for revaluation of assets and reassessment of liabilities and treatment of reserves and accumulated profits. Preparation of revaluation account and balance sheet.
  2. Admission of a partner –effect of admission of a partner on change in the profit-sharing ratio, treatment of goodwill (as per AS 26), treatment for revaluation of assets and reassessment of liabilities, treatment of reserves and accumulated profits, adjustment of capital accounts and preparation of balance sheet.
  3. Retirement and death of a partner: effect of retirement/death of a partner on change in profit sharing ratio, treatment of goodwill (as per AS 26), treatment for revaluation of assets and reassessment of liabilities, adjustment of accumulated profits and reserves, adjustment of capital accounts and preparation of balance sheet. Preparation of loan account of the retiring partner. Calculation of the deceased partner’s share of profit till the date of death. Preparation of deceased partner’s capital account, executor’s account and preparation of balance sheet.
  4. Dissolution of a partnership firm: types of dissolution of a firm. Settlement of accounts -preparation of realization account, and other related accounts: capital accounts of partners and cash/bank a/c (excluding piecemeal distribution, sale to a company and insolvency of partner(s)).

Unit 2: Accounting for Companies

  1. Accounting for Share CapitalShare and share capital: nature and types. Accounting for share capital: issue and allotment of equity shares, private placement of shares, Employee Stock Option Plan (ESOP). Public subscription of shares – over subscription and under subscription of shares; issue at par and at premium, call in advance and arrears (excluding interest), issue of shares for consideration other than cash. Accounting treatment of forfeiture and re-issue of shares. Disclosure of share capital in the company’s Balance Sheet.
  2. Accounting for DebenturesDebentures: Issue of debentures at par, at a premium and at a discount. Issue of debentures for consideration other than cash; Issue of debentures with terms of redemption; debentures as collateral security- concept, interest on debentures. Redemption of debentures: Lump sum, draw of lots and purchase in the open market (excluding ex-interest and cum-interest). Creation of Debenture Redemption Reserve.

Financial Statement Analysis

Unit 3: Analysis of Financial Statements

  1. Financial statements of a company: Statement of Profit and Loss and Balance Sheet in the prescribed form with major headings and subheadings (as per Schedule III to the Companies Act, 2013).
  2. Financial Statement Analysis: Objectives, importance and limitations.
  3. Tools for Financial Statement Analysis: Comparative statements, common-size statements, cash flow analysis, ratio analysis.
  4. Accounting Ratios: Objectives, classification and computation.
  5. Liquidity Ratios: Current ratio and Quick ratio.
  6. Solvency Ratios: Debt to Equity Ratio, Total Asset to Debt Ratio, Proprietary Ratio and Interest Coverage Ratio.
  7. Activity Ratios: Inventory Turnover Ratio, Trade Receivables Turnover Ratio, Trade Payables Turnover Ratio and Working Capital Turnover Ratio.
  8. Profitability Ratios: Gross Profit Ratio, Operating Ratio, Operating Profit Ratio, Net Profit Ratio and Return on Investment.

Unit 4: Cash Flow Statement

Meaning, objectives and preparation (as per AS 3 (Revised) (Indirect Method only)

Computerised Accounting

Unit 5: Computerised Accounting

Overview of Computerised Accounting System.

  1. Introduction: Application in Accounting.
  2. Features of Computerised Accounting System.
  3. Structure of CAS.
  4. Software Packages: Generic; Specific; Tailored.

Accounting Application of Electronic Spreadsheet.

  1. Concept of the electronic spreadsheet.
  2. Features offered by electronic spreadsheet.
  3. Application in generating accounting information – bank reconciliation statement; asset accounting; loan
  4. repayment of loan schedule, ratio analysis
  5. Data representation – graphs, charts and diagrams.

Using a Computerized Accounting System.

  1. Steps in the installation of CAS, codification and Hierarchy of account heads, creation of accounts.
  2. Data: Entry, validation and verification.
  3. Adjusting entries, preparation of balance sheet, profit and loss account with closing entries and opening entries. Need and security features of the system.

Database Management System (DBMS)

  1. Concept and Features of DBMS.
  2. DBMS in Business Application.
  3. Generating Accounting Information – Payroll.

CUET Syllabus 2022 for UG- Chemistry

Physical Chemistry

Unit 1: Some Basic Concepts in Chemistry

Matter and its nature, Dalton’s atomic theory; Concept of atom, molecule, element and compound; Physical quantities and their measurements in Chemistry, precision and accuracy, significant figures, S.I. Units, dimensional analysis; Laws of chemical combination; Atomic and molecular masses, mole concept, molar mass.

Unit 2: States of Matter

Classification of matter into solid, liquid and gaseous states.

Gaseous State:

Measurable properties of gases; Gas laws – Boyle’s law, Charle’s law, Graham’s law of diffusion, Avogadro’s law, Dalton’s law of partial pressure; Concept of Absolute scale of temperature; Ideal gas equation; Kinetic theory of gases (only postulates); Real gases, deviation from Ideal behaviour, compressibility factor and van der Waals equation.

Solid State:

Classification of solids: molecular, ionic, covalent and metallic solids, amorphous and crystalline solids (elementary idea); Bragg’s Law and its applications; Unit cell and lattices, packing in solids (fcc, bcc and hcp lattices), voids, calculations involving unit cell parameters, an imperfection in solids; Electrical, magnetic and dielectric properties.

Unit 3: Atomic Structure

Thomson and Rutherford atomic models and their limitations; Nature of electromagnetic radiation, photoelectric effect; Spectrum of hydrogen atom, Bohr model of hydrogen atom – its postulates, derivation of the relations for energy of the electron and radii of the different orbits, limitations of Bohr’s model; Dual nature of matter, de-Broglie’s relationship, Heisenberg uncertainty principle. Elementary ideas of quantum mechanics, quantum mechanical model of atom, its important features; various quantum numbers (principal, angular momentum and magnetic quantum numbers) and their significance; shapes of s, p and d – orbitals, electron spin and spin quantum number; Rules for filling electrons in orbitals – aufbau principle, Pauli’s exclusion principle and Hund’s rule, electronic configuration of elements(only upto Atomic Numbers 30), extra stability of half-filled and completely filled orbitals.

Unit 4: Chemical Bonding and Molecular Structure

Kossel – Lewis approach to chemical bond formation, concept of ionic and covalent bonds. Ionic Bonding: Formation of ionic bonds, factors affecting the formation of ionic bonds; calculation of lattice enthalpy. Covalent Bonding: Concept of electronegativity, Fajan’s rule, dipole moment; Valence Shell Electron Pair Repulsion (VSEPR) theory and shapes of simple molecules. Quantum mechanical approach to covalent bonding: Valence bond theory – Its important features, concept of hybridization involving s, p and d orbitals; Resonance. Molecular Orbital Theory – Its important features, LCAOs, types of molecular orbitals (bonding, antibonding), sigma and pi-bonds, molecular orbital electronic configurations of homonuclear diatomic molecules, concept of bond order, bond length and bond energy.

Unit 5: Chemical Thermodynamics

Fundamentals of thermodynamics: System and surroundings, extensive and intensive properties, state functions, types of processes. First law of thermodynamics – Concept of work, heat internal energy and enthalpy, heat capacity, molar heat capacity; Hess’s law of constant heat summation.

Unit 6: Solutions

Different methods for expressing the concentration of solution – molality, molarity, mole fraction, percentage (by volume and mass both), vapour pressure of solutions and Raoult’s Law – Ideal and non-ideal solutions, vapour pressure – composition, plots for ideal and non-ideal solutions; Colligative properties of dilute solutions – relative lowering of vapour pressure, depression of freezing point, elevation of boiling point and osmotic pressure; Determination of molecular mass using colligative properties; Abnormal value of molar mass, Van’t Hoff factor and its significance.

Unit 7: Electrochemistry

Electrochemical cells – Electrolytic and Galvanic cells, different types of electrodes, electrode potentials including standard electrode potential, half – cell and cell reactions, emf of a Galvanic cell and its measurement; Nernst equation and its applications; Relationship between cell potential and Gibbs’ energy change; Dry cell and lead accumulator; Fuel cells.

Unit 8: Chemical Kinetics

Rate of a chemical reaction, factors affecting the rate of reactions: concentration, temperature, pressure and catalyst; elementary and complex reactions, order and molecularity of reactions, rate law, rate constant and its units, differential and integral forms of zero and first order reactions, their characteristics and half – lives, effect of temperature on rate of reactions – Arrhenius theory, activation energy and its calculation, collision theory of bimolecular gaseous reactions (no derivation).

Inorganic Chemistry

Unit 9: Classification of elements & Unit 11: Classification of elements and periodicity in properties

Modem periodic law and present form of the periodic table, s, p, d and f block elements, periodic trends in properties of elements atomic and ionic radii, ionization enthalpy, electron gain enthalpy, valence, oxidation states and chemical reactivity.

Unit 10: Hydrogen

Position of hydrogen in periodic table, isotopes, preparation, properties and uses of hydrogen; Physical and chemical properties of water and heavy water; Hydrogen as a fuel.

Unit 11: S – Block elements (alkali and alkaline earth metals)

Group – 1 and 2 Elements

General introduction, electronic configuration and general trends in physical and chemical properties of elements, anomalous properties of the first element of each group, diagonal relationships. Preparation and properties of some important compounds – sodium carbonate and sodium hydroxide; Industrial uses of lime, limestone, Plaster of Paris and cement; Biological significance of Na, K, Mg and Ca.

Unit 12: P – Block Elements

Group – 13 to Group 18 Elements

General Introduction: Electronic configuration and general trends in physical and chemical properties of elements across the periods and down the groups; unique behaviour of the first element in each group. Group-wise study of the p – block elements

Group – 13

Preparation, properties and uses of boron and aluminium; properties of diborane, aluminium chloride and alums.

Group – 14

Allotropes of carbon, the tendency for catenation; Structure & properties of silicates, and zeolites.

Group – 15

Properties and uses of nitrogen and phosphorus; Allotropic forms of phosphorus; Preparation, properties, structure and uses of ammonia, nitric acid, Structures of oxides and oxoacids of phosphorus.

Group – 16

Preparation, properties, structures and uses of ozone; Allotropic forms of sulphur; Preparation, properties, structures and uses of sulphuric acid.

Group – 17

Preparation, properties and uses of hydrochloric acid; Trends in the acidic nature of hydrogen halides; Structures of Interhalogen compounds and oxides and oxoacids of halogens.

Group – 18

Occurrence and uses of noble gases.

Unit 13: D and F – Block Elements

Transition Elements

General introduction, electronic configuration, occurrence and characteristics, general trends in properties of the first row transition elements – physical properties, ionization enthalpy, oxidation states, atomic radii, colour, catalytic behaviour, magnetic properties, complex formation, interstitial compounds, alloy formation; Preparation, properties and uses of K2Cr2O7 and KMnO4. Inner Transition Elements Lanthanoids – Electronic configuration, oxidation states and lanthanoid contraction. Actinoids – Electronic configuration and oxidation states.

Unit 14: Co-ordination Compounds

Transition Elements

Introduction to co-ordination compounds, Werner’s theory; ligands, co-ordination number, denticity, chelation; IUPAC nomenclature of mononuclear co-ordination compounds, isomerism; Bonding-Valence bond approach and basic ideas of Crystal field theory, colour and magnetic properties; Importance of co-ordination compounds (in qualitative analysis, extraction of metals and in biological systems).

Organic Chemistry

Unit 15: Purification and Unit 19: Purification and Characterisation of Organic Compounds

Qualitative analysis – Detection of nitrogen, sulphur, phosphorus and halogens. Quantitative analysis (basic principles only) – Estimation of carbon, hydrogen, nitrogen, halogens, sulphur, phosphorus. Calculations of empirical formulae and molecular formulae; Numerical problems in organic quantitative analysis.

Unit 16: Some Basic Principles of Organic Chemistry

Tetravalency of carbon; Shapes of simple molecules – hybridization (s and p); Classification of organic compounds based on functional groups: – C = C – and those containing halogens, oxygen, nitrogen and sulphur; Homologous series; Isomerism – structural and stereoisomerism. Nomenclature (Trivial and IUPAC) Covalent bond fission – Homolytic and heterolytic: free radicals, carbocations and carbanions; stability of carbocations and free radicals, electrophiles and nucleophiles. Electronic displacement in a covalent bond – Inductive effect, electromeric effect, resonance and hyperconjugation.

Unit 17: Hydrocarbons

Classification, isomerism, IUPAC nomenclature, general methods of preparation, properties and reactions. Alkanes – Conformations: Sawhorse and Newman projections (of ethane); Mechanism of halogenation of alkanes. Alkenes – Geometrical isomerism; Mechanism of electrophilic addition: addition of hydrogen, halogens, water, hydrogen halides (Markownikoff’s and peroxide effect); Ozonolysis and polymerization.

Alkynes – Acidic character; Addition of hydrogen, halogens, water and hydrogen halides; Polymerization. Aromatic hydrocarbons – Nomenclature, benzene – structure and aromaticity; Mechanism of electrophilic substitution: halogenation, nitration, Friedel – Craft’s alkylation and acylation.

Unit 18: Organic Compounds Containing Halogens

Classification, isomerism, IUPAC nomenclature, general methods of preparation, properties and reactions. Alkanes – Conformations: Sawhorse and Newman projections (of ethane); Mechanism of halogenation of alkanes. Alkenes – Geometrical isomerism; Mechanism of electrophilic addition: addition of hydrogen, halogens, water, hydrogen halides (Markownikoff’s and peroxide effect); Ozonolysis and polymerization.

Alkynes – Acidic character; Addition of hydrogen, halogens, water and hydrogen halides; Polymerization. Aromatic hydrocarbons – Nomenclature, benzene – structure and aromaticity; Mechanism of electrophilic substitution: halogenation, nitration, Friedel – Craft’s alkylation and acylation.

Unit 19: Organic Compounds Containing Oxygen

General methods of preparation, properties, reactions and uses. Alcohols, Phenols and Ethers Alcohols: Identification of primary, secondary and tertiary alcohols; mechanism of dehydration. Phenols: Acidic nature, electrophilic substitution reactions: halogenation, nitration and sulphonation, Reimer – Tiemann reaction. Ethers: Structure. Aldehyde and Ketones: Nature of carbonyl group; Nucleophilic addition to >C=O group, relative reactivities of aldehydes and ketones; Important reactions such as – Nucleophilic addition reactions (addition of HCN, NH3 and its derivatives), Grignard reagent; oxidation; reduction (Wolff Kishner and Clemmensen); acidity of – hydrogen, aldol condensation, Cannizzaro reaction, Haloform reaction; Chemical tests to distinguish between aldehydes and Ketones. Carboxylic acids Acidic strength and factors affecting it.

Unit 20: Organic Compounds Containing Nitrogen

General methods of preparation, properties, reactions and uses. Amines: Nomenclature, classification, structure, basic character and identification of primary, secondary and tertiary amines and their basic character. Diazonium Salts: Importance in synthetic organic chemistry.

Unit 21: Chemistry in Everyday Life

Chemicals in medicines – Analgesics, tranquillizers, antiseptics, disinfectants, antimicrobials, antifertility drugs, antibiotics, antacids, antihistamines – their meaning and common examples. Chemicals in food – Preservatives, artificial sweetening agents – common examples. Cleansing agents – Soaps and detergents, cleansing action.

CUCET Syllabus 2022 for UG- Physics

  1. Measurement
  2. Motion in one dimension
  3. Laws of Motion, Motion in two dimensions
  4. Work, Power and Energy
  5. Linear Momentum & collisions
  6. Rotation of a rigid body about a fixed axis
  7. Gravitation
  8. Oscillatory motion
  9. Mechanics of solids and fluids
  10. Heat and thermodynamics
  11. Wave
  12. Electrostatics
  13. Current Electricity
  14. Magnetic Effect of Current
  15. Magnetism in Matter
  16. Electromagnetic induction
  17. Ray Optics and optical instruments
  18. Wave Optics
  19. Modern Physics

CUET Syllabus 2022 for UG- Chemistry

  1. Atomic Structure
  2. Chemical Bonding
  3. Redox Reactions
  4. Chemical Equilibrium and Kinetics
  5. Acid-Base concepts
  6. Electrochemistry
  7. Catalysis
  8. Colloids
  9. Colligative Properties of Solution
  10. Periodic Table
  11. Preparation and Properties of certain substances
  12. Thermochemistry
  13. General Organic Chemistry
  14. Reaction intermediates
  15. Isomerism
  16. Polymers
  17. Carbohydrates
  18. Solid State
  19. Petroleum

CUET Syllabus 2022 for UG- Maths

  1. Algebra
  2. Probability
  3. Trigonometry
  4. Coordinate Geometry
  5. Calculus
  6. Vectors
  7. Dynamics
  8. Statics

CUET Syllabus 2022 for UG- Biology

Zoology

  1. Origin of Life
  2. Organic Evolution
  3. Human Genetics and Eugenics
  4. Applied Biology
  5. Mammalian Anatomy
  6. Animal Physiology

Botany

  1. Plant Cell
  2. Protoplasm
  3. Ecology
  4. Ecosystem
  5. Genetics
  6. Seeds in angiosperm plants
  7. Fruits
  8. Cell Differentiation Plant Tissue
  9. Anatomy of Root, Stem, and Leaf
  10. Important Phylum

CUET Syllabus 2022 for UG- BA Economics

UNIT-1: Introduction

Meaning of microeconomics and macroeconomics

What is an economy? Central problems of an economy: what, how and for whom to produce; concepts of production possibility frontier and opportunity cost.

UNIT-2: Consumer Equilibrium and Demand

Consumer’s equilibrium – meaning of utility, marginal utility, law of diminishing marginal utility, conditions of consumer’s equilibrium using marginal utility analysis.

Indifference curve analysis of consumer’s equilibrium-the consumer’s budget (budget set and budget line), preferences of the consumer (indifference curve, indifference map) and conditions of consumer’s equilibrium.

Demand, market demand, determinants of demand, demand schedule, demand curve and its slope, movement along and shifts in the demand curve; price elasticity of demand – factors affecting price elasticity of demand; measurement of price elasticity of demand – (a) percentage-change method and (b) geometric method (linear demand curve); relationship between price elasticity of demand and total expenditure.

UNIT-3: Producer Behaviour and Supply

Production function – Short-Run and Long-Run

Total Product, Average Product and Marginal Product.

Returns to a Factor.

Cost and Revenue: Short run costs – total cost, total fixed cost, total variable cost; Average cost; Average fixed cost, average variable cost and marginal cost-meaning and their relationship.

Revenue – total, average and marginal revenue – meaning and their relationship.

Producer’s equilibrium-meaning and its conditions in terms of marginal revenue-marginal cost.

Supply, market supply, determinants of supply, supply schedule, supply curve and its slope, movements along and shifts in supply curve, price elasticity of supply; measurement of price elasticity of supply – (a) percentage change method and (b) geometric method.

UNIT-4: Forms of Market and Price Determination

Perfect competition – Features; Determination of market equilibrium and effects of shifts in demand and supply.

Other Market Forms – monopoly, monopolistic competition, oligopoly – their meaning and features.

Simple Applications of Demand and Supply: Price ceiling, price floor.

UNIT-5: National Income and related aggregates

Some basic concepts: consumption goods, capital goods, final goods, intermediate goods; stocks and flows; gross investment and depreciation.

Circular flow of income; Methods of calculating National Income – Value Added or Product method, Expenditure method, Income method.

Aggregates related to National Income: Gross National Product (GNP), Net National Product (NNP), Gross and Net Domestic Product (GDP and NDP) – at market price, at factor cost; National Disposable Income (gross and net), Private Income, Personal Income and Personal Disposable Income; Real and Nominal GDP. GDP and Welfare.

UNIT-6: Money and Banking

Money – its meaning and functions.

Supply of money – Currency held by the public and net demand deposits held by commercial banks.

Money creation by the commercial banking system.

Central bank and its functions (example of the Reserve Bank of India): Bank of issue, Govt. Bank, Banker’s Bank, Controller of Credit through Bank Rate, CRR, SLR, Repo Rate and Reverse Repo Rate, Open Market Operations, Margin requirement.

UNIT-7: Determination of Income and Employment

Aggregate demand and its components. Propensity to consume and propensity to save (average and marginal).

Short–run equilibrium output; investment multiplier and its mechanism.

Meaning of full employment and involuntary unemployment.

Problems of excess demand and deficient demand; measures to correct them – change in government spending, taxes and money supply.

UNIT-8: Government Budget and the Economy

Government budget – meaning, objectives and components.

Classification of receipts – revenue receipts and capital receipts; classification of expenditure – revenue expenditure and capital expenditure.

Measures of government deficit – revenue deficit, fiscal deficit, primary deficit their meaning.

UNIT-9: Balance of Payments

Balance of payments account – meaning and components; balance of payments deficit-meaning.

Foreign exchange rate – meaning of fixed and flexible rates and managed floating.

Determination of exchange rate in a free market.

CUET Syllabus 2022 for UG- BA Sociology

UNIT-1: Introducing Indian Society

Colonialism, Nationalism, Class and Community

UNIT-2: Demographic Structure and Indian Society

Rural-Urban Linkages and Divisions

UNIT-3: Social Institutions: Continuity and Change
  • Family and Kinship
  • The Caste System
UNIT-4: Market as a Social Institution

Market as a Social Institution

UNIT-5: Pattern of Social Inequality and Exclusion
  • Caste Prejudice, Scheduled Castes and Other Backward Classes
  • Marginalization of Tribal Communities
  • The Struggle for Women’s Equality
  • The Protection of Religious Minorities
  • Caring for the Differently Abled
UNIT-6: The Challenges of Cultural Diversity
  • Problems of Communalism, Regionalism, Casteism and Patriarchy
  • Role of the State in a Plural and Unequal Society
  • What We Share
UNIT-7: Structural Change

Colonialism, Industrialization, Urbanization

UNIT-8: Cultural Change
  • Modernization, Westernization, Sanskritisation, Secularization
  • Social Reform Movements and Laws
UNIT-9: The Story of Democracy
  • The Constitution as an instrument of Social Change
  • Parties, Pressure Groups and Democratic Politics
  • Panchayati Raj and the Challenges of Social Transformation
UNIT-10: Change and Development in Rural Society

Land Reforms, Green Revolution and Agrarian Society

UNIT-11: Change and Development in Industrial Society
  • From Planned Industrialization to Liberalization
  • Changes in the Class Structure
UNIT-12: Globalisation and Social Change
  • Meaning and Nature of Globalisation: Economic Dimension, Cultural Dimension
  • Theories of Social Change: Cyclical, Structure-Functionalist theory, Linear Theory of social Change.
  • Factors of Social Change
UNIT-13: Mass Media and Communication Process
  • Understanding Mass Media and Communication: Meaning and Definition
  • Elements, Process and Functions of Communication
  • Types of Mass-Media
UNIT-14: Social Movements
  • Concept of Social Movement
  • Types of Social Movements
  • Theories of Social Movement: Relative Deprivation Theory, The Strain Theory
  • Class-Based Movements: Workers, Peasants
  • Caste-Based Movements: Dalit Movement, Backward Castes, Trends in Upper Caste
  • Responses
  • Women’s Movements in Independent India
  • Tribal Movements
  • Environmental Movements

CUET Syllabus 2022 for PG Courses

Candidates should know that the CUET Syllabus 2022 may differ for every postgraduate programme. CUET PG Syllabus consists of two parts-

PART-A: 25 objective questions (MCQs) and will include English, General Awareness, Mathematical Aptitude and Analytical Skills.

PART-B: 75 objective questions (MCQs) from the Subject matter.

The complete syllabus for each syllabus has been provided in the PDF, which can be downloaded directly from the below link.

CUET 2022 Syllabus PDF for PG Courses- Download PDF

Related Post:

 

CUET Syllabus 2022: FAQs

Q. How many questions will be asked in CUET 2022 examination?

100 questions will be asked in CUET 2022 examination.

Q. What is the duration of the CUET 2022 examination?

The students will be given 2 hours to complete the CUET 2022 examination.

Q. Where I can get CUET Syllabus 2022?

You can get CUET Syllabus 2022 from Adaa247’s official website.

Q. CUET 2022 Examination will be conducted in which mode?

CUET 2022 examination will be conducted in online mode.

Q. Is there any negative marking in CUET 2022 examination?

Yes, 0.25 marks will be deducted for each wrong answer.

Sharing is caring!

Leave a comment